..
-- Products --
   
   

.
Model No. :
GC - 5P / 3P
GRADUATE
Corrugator...as the operator would have designed it : for easier operation, for greater productivity, for minimum maintenance year after year.

 
GRADUATE
Less slowdown time greater output with Automatic Order Changer (optional)

This Order Change System brings the Corrugator another step closer to a completely automated combining line. It is the fastest automatic changeover system today because its sequential operation reduces change time to the minimum possible. The Automatic Order Change System sets the working pace at the slitter and sheet collector. Operators maintain their activity to match production of the machine. In addition, where order changes are frequent, a gain of 100,000 square feet of board pershift is normally realized, when compared with machines lacking this feature. A Corrugator producing board at 300 fpm takes only 30 seconds to go from operating speed again.

Flatter board, better printability with Adhesive System
The exclusive Anilox Adhesive System offers many extras in addition to yielding glue savings up to 25%. Because of the uniquely engraved anilox roll, there is an extremely uniform level of glue released to the flute tips. The result is less moisture for flatter board with better printing qualities. The unconstrained withdrawal of glue from the exclusive engraving avoids starch build-up so that the roll "cleans itself." Some boxmakers have reported a successful switchover to a single starch viscosity system for their corrugators through the use of the Anilox Adhesive System.

Easier operation, better board with Single Facer
Corrugating rolls are finish ground, not milled, planed or lapped. PreCision grinding yeilds truest flute contours, permitting high-speed boardmaking right from startup. This Model has a new steam-shower conept to assure more accurate flute formation at high speeds. The machine is open in design for convenient adjustment, complete visibility and cooler operation. Servicing, such as stripping )f congealed adhesive, can be done without moving the ingers from normal opearting position. The pendant control lanel travels with the operator, making threading and linep of medium and liner easier, faster.

Constant automatic web tension with Mill Roll Stand
You start by saving the attention normally needed for repeated brake adjustments to hold web tension just right. This Model with brake tensioner does it automatcally, helping to control long-way warpage and diagonal twist in the double facer, reducing split cores, broken webs. Positioning scales enable fast, accurate prealignment of rolls.Both result in accurate alignment of medium with liner. The roll carrier can rotate 3600 in either direction. This reduces paper waste and adds to productivity. The Graduate Mill Roll, of all mill roll stands, is the most readily adaptable to complete corrugator automation.

Smooth operation, accurate cutting with Cutoff
Graduate developed the first Duplexffriplex Cutoff which makes possible a new concept in corrugator scheduling. This new concept leads to greater flexibility, reduction in roll inventory and reduction of waste. In addition, the model provides smoother, more accurate cutting because of several majorteatures. The knife bars are counterbalanced to dampen the interia peaks, providing smoother operation and more precise sheet length cutting. The large-diameter knife bars reduce the whip necessary to meet the linear speed of the board when cutting in the normal sheet-length range. Service is minimized, too, since the entire Reeves Drive Unit is specially constructed and permanently sealed so that it never needs lubrication.

What makes this Corrugator the India's most advanced corrugator--and why would the operator have designed it just this way? There are many reasons. The entire Corrubiner requires a minimum of operator attention. It allows more time for quality control, more time to cut down on material waste.

Feeder
Changing sheet size in the stacker system area involves the adjustment of the following sizes and quantities:
Sheet length
Sheet width
Number of units
Speed
Stack surface area
Flexo Printer
Ensuring the reliable changing of sheet size
During continuous operation, i.e. changing
Stacks at full running speed, makes heavy
Demands on both machine and control
Technology:

The Corrugator concept offers a
Demonstrade solution to this problem.

The Corrugator sheet stacker unit can be
combined with two different palletized
systems.
Slotter Creaser
Pallestisation can be achieved outside the
stacker system or integrated into the stacker
system. Palletisation outside the stacker
system - provided there is sufficient space-
is the more cost -effective answer.
An automatic pallet feeding device is provided
With both system.
 
--- Specification ---
Overall Dimensions
Width.......Machine size plus 50 inches, (does not include catwalk overhang)
length.......Approximately fifty feet per section
The Bridge is approximately 12ft. above the floor level.
Size in Inch/mm
46"
(1168)
56"
(1422)
66"
(1676)
76"
(1930)
86"
(2184)
96"
(2438)
Min. Paper Width in Inch/mm
45"
(1143)
55"
(1397)
65"
(1651)
75"
(1905)
85"
(2159)
95"
(2413)
Max. Speed of the Machine MPM (FPM)
200
(654)
200
(654)
150
(490)
100
(327)
100
(327)
100
(327)
Net Weight in Tons
25
30
35
41
45
50
 
CONNECTIONS
 
STEAM
Pressure 8 to 14 Bar
STARCH
Viscosity 40 to 80 SH
WATER`
Consumption ~ 20 Ltr\min
INSTALLED POWER
Max ~ 92 Kw
Note : Because of a policy of continual development, The Company reserves the right to amend design & specifivations without prior notice.
.
.


3/5 Ply Automatic Board Plant

---------------------------
Fingerless Single Facer Paper Corrugating Machine
---------------------------
Fingerless Single Facer with two Profiles
---------------------------
Single Facer Corrugating Machine
---------------------------
Single Facer Corrugating Machine (Vertical Type)
---------------------------
Flexo Printer Sloter Creaser Cum Rotary Die Cutter
---------------------------
Automatic Sheet Laminating Machines
---------------------------
Automatic Floder Gluer
---------------------------
Flexo Board Printer
---------------------------
Auto Reel to Sheet Cutter
---------------------------
Sheet Pasting (Glueing) Machine
---------------------------
Sheet Pressing Machine
---------------------------
Board Cutter
---------------------------
Auto Partition Slotter
---------------------------
Automatic Assembly of corrugated Board Partitions
---------------------------
4-Bar Rotary Siltter Creaser
---------------------------
Overhung Eccentric Slotter
---------------------------
Combined Creaser Slotter
---------------------------
Box Stitching Machine
---------------------------
Semi Sheet Laminating Machines
---------------------------
Heavy Duty Punching, Creasing & Embossing Press
---------------------------
Corrugator Rolls & Pressure Rolls
---------------------------
Chain Feeding Rotary
Die Cutting Machine

---------------------------
Printing Slotting and Die Cutting Machine
---------------------------
Per-Heater & Pre-Conditioner
---------------------------
3 no. of Pre-Heater for Paper and 2 Ply
---------------------------
Mill Roll Stand
---------------------------
Hydraulic Mill Roll Stand
---------------------------
Single Facer Fingerless
---------------------------
Single Facer Fingerless (PLC Controlled)
---------------------------
Hot & Cold System
---------------------------
Over Bridge Conveyor
---------------------------
Pasting Machine
---------------------------
Graduate
Pasting Machine

---------------------------
Semi Automatic Lamination Machine
---------------------------
Heavy Duty Flatbed Die Cutting Machine
---------------------------
Single Facer With Sheeter
---------------------------
Reel to Reel Slitting Machine
---------------------------
Gum Making Plant
---------------------------
Auto Stacker
---------------------------
Fully Automatic Stiching Machine
---------------------------
Speeding Semi-Auto Stitcher
---------------------------
Single Face Paper Corrugating Machine
---------------------------
Corrugating Problems Solutions
---------------------------
Paper Testing
---------------------------

How is corrugated made?
---------------------------
Why Corrugated?
---------------------------
Our Exports
---------------------------


 
.
PAPER BOARD MACHINERY COMPANY
Regd. Office :
115, D.L.F. INDUSTRIAL AREA PHASE - 1, FARIDABAD - 121003, HARYANA (INDIA)

Contact Numbers :

Telefax : + (91) - (129) + 4113117  
Mobile : 0091 - 9811071540, 9818056789

E-mail :

paperboard@gmail.com corrugatingmachinery@gmail.com nagpalgroup@gmail.com

URL :

www.corrugatingmachinery.com  
Made In India
© Copyright 2005, Paper Board Machinery Company                  Website Developed by FOCUS MediaTech